Statybinių medžiagų drėgmės matuokliai
Moisture meter MRH III with Hygro-i2® - additional reinforced concrete probe
€86500without VAT 714.88 €
Price includes VAT 21%.
The indicated price is valid ordering till 06.09.2025.
The stock is informative
The indicated price is valid ordering till 06.09.2025.
The stock is informative
Tramex MRH III Moisture and Humidity Meter
The Tramex MRH III Moisture and Humidity Meter from Ireland is a hand-held digital moisture meter calibrated for most building materials. It also attaches to an plug-in Tramex Hygro-i2 ® relative humidity probe and optional heavy-duty pin type electrodes. Suitable for many industries including Water Damage Restoration, Flooring, Indoor Air Quality, Home Inspection and Pest Control.
!!! This set is supplemented with an external moisture measuring probe Hygro-I2 ® for concrete, which provides the possibility to measure the moisture smoothly and accurately also in concrete with iron reinforcement and metal fibers. !!!
Hygro-i2 Relative Humidity Sensor Specifications:
|
Range:
|
0 to 100%RH
|
|
Accuracy:
|
0% to 99%RH ±2.0%RH
|
|
Resolution:
|
0.1% over the complete range
|
|
Drift:
|
<0.25%RH per year
|
Hygro-i2 Temperature Sensor Specifications:
|
Range:
|
-40ºC to 125ºC
|
|
Accuracy:
|
±0.1 °C Range 20°C to 60°C
|
|
Sensor Protection:
|
PTFE Film protects sensor opening from water & dust
|
|
Drift:
|
<0.03ºC per year NIST traceable. (National Institute of Standards and Technology)
|
Features:
- Digital, non-destructive moisture meter MRHIII.
- Optional plug-in wood probe.
- Plug-in Tramex Hygro-i2 ® humidity probe for reinforced concrete - as part of this kit.
- Deep signal penetration to over 25mm (1") into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.
- Specific gravity adjustment for most wood species.
- External Rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability.
- Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.
- Backlight, large, clear, easy to read LCD display.
- “Hold” function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible.
- Switchable "On" or "Off" audio warning tone.
- Automatic power cutoff switches "Off" when not in use.
- Automatic default to last user setting when switched back on.
- Battery operated (included).
| Industry | |
| ::: | Water Restoration, Indoor Air Quality, Pest Control, Home Inspection, Surveying, Flooring, Residential Roofing. |
| Material | |
| ::: | Concrete, drywall, wood, plaster, brick, ceramic, porcelain tiles, resilient flooring, laminates, asphalt composition shingles and most building materials. |
| Technical Data | |
| Weight: | 240g (8.47oz) |
| Size | 150mm x 85mm x 38mm (6" x 3.5" x 1.5") |
| Construction | ABS Body |
| Power | 9 Volt PP3 Battery |
| Display | Digital / BACKLIT |
| Depth of penetration | up to 30 mm (1 ¼ ") (in wood and drywall) |
| Measuring Range: | |
| Reference Scale for Building Materials | 0 to 100 |
| Wood Non-Invasive Mode | 5 to 55% ( at S.G of 0.3 ) |
| Wood Invasive Mode | 7 to 40% using optional pin type wood probe |
| Relative Humidity | 0 to 99% using optional Hygro-i ® RH probe |
Kit consist of:
- Measuring unit MRH III in soft bag
- Concrete moisture probe Hygro-i2 ®
- Hygro-I2 ® connection cable
- Plastic hole liners for Hygro-I2 - 12 pc
- 9V KRONA Alkaline battery
- Hard case
- Manual
TRAMEX warranty - 1 year.
