Mašinų valdymo lazerinio lygio imtuvai

FMR-706M/C is laser receiver for construction machines controlling - excavators, bulldozers and graders - with the help of laser levels.
Laser receiver FMR-706M/C is designed for use with construction machines. The receiver is used to control the height of the excavator bucket or dozer's  / grader's blade along the base laser plane defined by any red laser level.

The FMR-706M/C receiver will be fixed to the machine with the help of magnets or to mast with special clamps.
The sensitive surface of the detector with a height of 25 centimeters and the ability to catch the beam at 360 ° around it allows it to be used to solve a wide variety of tasks.
 
Main applications:
- control of the depth of the selected soil excavator in quarries, ditches or at the construction site
- control of the filling and hauling of the soil when planning with the dump of the pads and pads under the road bed - will help to avoid overly selected or overfilled soil
- the alignment of large areas of volume before the construction of all kinds.
 
Benefits:

•     Big detector height (25 cm)
•     360 ° beam receiving
•     Powered by internal battery
•     The ability to connect the display FRP 707, installed in the cab
•     Works with any models of red laser rotational levels.
•     Dust and moisture protection according to IP66

Equipment:

•     FMR-706M/C receiver
•     Charger 220V / 50 Hz
•     12/24 V power cable with crocodiles
•     Shipping case

Specifications:
Working range: up to 200 m *
Accuracy ("accurate" mode): ± 2 mm - ± 10 mm
Accuracy ("normal" mode): ± 5 mm - ± 23 mm
Sensor height: 25 cm
Power 1: built-in NiMH battery (7.2 V, 2500 mAh)
Power 2: from on-board voltage 12V / 24V
Working time: 40 hours
Charging time: 15 hours
Operating temperature: -20 ° C to + 50 ° C
Protection against water and dust: IP66
Dimensions: 376 x 180 x 49 mm
Weight: 3.1 kg

* Depending on the class of laser level