Betono ir mūro kietumo matuokliai

Schmidt Hammer HT-225 for concrete hardness tests - CALIBRATED!

code: SI120001
in stock, 10+ cnt.
22500without VAT 185.95 €
    Price includes VAT 21%.
    The indicated price is valid ordering till 06.09.2025.
    The stock is informative
    Schmidt Hammer HT-225 from Starmeter Instruments.
     
               Schmidt Hammer HT-225 is a device to measure the elastic properties or strength of concrete or rock, mainly surface hardness and penetration resistance in the range from 10 to 60 MPa.
               The hammer measures the rebound of a spring loaded mass impacting against the surface of the sample. The test hammer will hit the concrete at a defined energy. Its rebound is dependent on the hardness of the concrete and is measured by the test equipment.
               HT-225 is easy to use instrument. You can use it indoor and outdoor.
    We offer to calibrate the instrument in accordance with ISO requirements - with a prepared calibration act and protocol. Price of the service: 39, - EUR with VAT included.

    Specification:

    Impact energy no less than 2.207 joule
    Strike tension spring stiffness no more than 70 H
    Value graduation scale 2 standard units
    Height of rebound at strike on anvil 80 ±2 standard units of the scale of Schmidt Hammer
    Readings at rebound height measurements (on anvil) ±2 standard units of the scale of Schmidt Hammer
    Hardness of working surface of indenter no less than 60 HRC
    Roughness of indenter ≤10 mkm
    Radius of indenter head 25±1 mm
    Dimensions (length, Ø max.) 280, 43
    Weight, kg 1,7

    Warranty 2 years.