Correlators

Hybrid water leakage correlator Correlux C-3 Pro SET with 3 additional data loggers/sensors.

code: 165
manufacturer: SEBA KMT
possible to order
1658000without VAT 13702.48 €
    Price includes VAT 21%.
    The indicated price is valid ordering till 06.09.2025.
    The stock is informative
    Correlux C-3 Pro SET is a digital Hybrid correlator from SebaKMT (Germany) for locating water leaks in the ground for underground water pipes, additionally equipped with 3 pieces of correlation sensors/data loggers.

    The Correlux C-3 correlator locates leaks in drinking water pipes. Pressurized water at the leak location creates a noise which travels out in all directions of the pipe.
    This noise is recorded, amplified and sent wirelessly to the correlator by two sensors (piezo microphone, hydrophone) which are attached to the pipe (e.g. valve, hydrants).
    The Correlux C-3 compares both signals (correlation) and calculates the exact distance to the leakage on the basis of the delay time of the signals, the sensor distance and the sound velocity in the pipe.

    Special features:

    • Easy to use with touch display
    • Online and offline correlation
    • Long operating time and inductive sensor charging
    • Pinpoint location using multi-sensors or ground microphone
    • Perfect for plastic pipes and pipelines
    • Multi-correlation without pipe parameter input

    The Correlux C-3 is suitable for both immediate measurement (online) as well as night measurement (offline). If the measuring point is easily accessible and is not in a danger area, then online measurement comes into effect. Power transmitters are deployed in this case (transmitter and microphone). These transmit the live signal directly to the correlator and you receive the result immediately. However, if the measuring point is in an area which is difficult to access or if there is lots of interference, then you have the option to conduct an offline measurement using the power transmitters or up to 8 multi-sensors. The multi-sensors are programmed accordingly with the correlator and then deployed. Following the measurement the power transmitters and multi-sensors are collected in and the data can be read and evaluated by the correlator. With the aid of pinpoint location you can now determine the exact position of the leak, either with the multi-sensors or with a PAM W-2 ground microphone. Both options can be carried out using the Correlux C-3; no other devices are needed. The correlator housing is light and easy to handle. The touch display also makes it easier to use and improves the readability. The system is charged in the transport case supplied using wireless inductive charging. This means that only one charging cable is needed for the complete charging of all devices.