Receivers for Line Lasers
Universal laser beam receiver for HR1220 line projection laser levels
€20500without VAT 169.42 €
Price includes VAT 21%.
The indicated price is valid ordering till 06.09.2025.
The stock is informative
The indicated price is valid ordering till 06.09.2025.
The stock is informative
HR1220 receiver is definitely not color-blind.
It is compatible with current Spectra Precision (USA) models LT52R, LT52G, LT56 and LT58G and most other manufacturers' laser levels. The receiver can extend the indoor working range of these cross line lasers, as well as increase the versatility of the laser levels by allowing them to be used outdoors where the beam may not be visible. The HR1220 comes with a C20 staff bracket so that the receiver can be easily attached to a staff.
The HR1220 Laser Receiver detects both red and green laser beams generated from crossline lasers including the LT52R, LT52G, LT56, and LT58G. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use.
Specifications:
Working Radius: (Laser Dependent) 85 m
Laser Detection Height: 127.0 mm
Elevation Readout: Front and rear LCDs
Audio Control: Loud / Low / Off
Capture Height: 80 mm
Accuracy: ±1.0 and ±2.0 mm
Marking Notches: 60 mm below top of receiver
Battery Life: 40+ hours
Low Battery Indicator: Battery symbol on LCD
Power Supply: 2 AA alkaline batteries
Operating Temperature: –10 °C to 50 °C
Storage Temperature: –20 °C to 70 °C
Automatic Shut-Off: 30 min
Features:
- Green and Red Beam Line Laser Receiver
- Front and rear LCDs provides easy viewing from either side
- Illuminated LCDs for readings in low light conditions
- Two accuracy selections to fit various jobsite requirements
- Large 80 mm (3 inch) reception height for quick beam acquisition
- Audio volume High, Low or Off for various job-site conditions or individual preference
- Dual horizontal and vertical level bubbles for accurate horizontal and vertical readings
- Work indoors and outdoors increases laser versatility
- Built-In magnets on top of receiver for quick attachment to ceiling grids or metal studs
- Includes rod clamp for attachment to grade rods and staffs
- Four-stage battery status indicates life of battery remaining to eliminate surprise power issues
- Automatic shut-off when not in use conserves battery life
- Marking notches on each side at on-grade for easy transferring of 1 meter (4 foot) marks
- All around over-molding protects the unit
- 3-Year Warranty
