Penetrometers / deflectometers
INSPECTOR-4M Light Weight Deflectometer from ENGLO
The indicated price is valid ordering till 06.09.2025.
The stock is informative
Ground bearing capacity measurer INSPECTOR-4M from ENGLO, Estonia.
Portable falling weight deflectometer (FWD) INSPECTOR-4M from ENGLO OU (Estonia) is a portable non-destructive device to estimate the bearing capacity of the ground either with or without the binding material. The ground elastic modulus is measured in units of MPa. The device may be used in pavement testing for road construction, building etc.
INSPECTOR-3 uses the falling weight energy for ground elastic deformation. Based on measurement of this deformation, dynamic elastic modulus and several additional parameters can be calculated.
The measurement data is easily presented
The measurement results and other data appear on the backlighted LCD. The results of up to 200 measured series are saved in the device inner memory (each serie contains 8 tests). The saved data can be transferred to PC by BLUETOOTH connection or USB port. Convenient PC software enables automatically produce measurement protocols with measurement date, time and ambient air temperature.
When INSPECTOR-4M is used with additional GPS-module, the GPS co-ordinates of each serie will be written into the protocol. Therefore all series can be tracked in Google Earth and Google Map.
The new model is more rugged
INSPECTOR-4M has rugged and waterproof aluminium body. For transport the device is placed into a reinforced waterproof wooden trunk.
Technical specification:
-
Falling weight
10 kg
Loading force
23 kN
Falling weight drop height
800 mm
Loading plate diameters
140 and 200 mm
E-modulus range
5 - 900 MPa
Operation voltage
18 V (two 9 V ALKALINE batteries)
Temperature range
-10 °C to +40 °C
Protection level
IP65
Weight without the trunk
16 kg
Dimensions
1150 x 110 x 110 mm