Vooluhulgamõõturid
Water flow meter / monitoring device SebaFlowM BAT for pipes with a diameter up to 400mm
The indicated price is valid ordering till 06.09.2025.
The stock is informative
SEBAFLOW-BAT - permanent zone monitoring with ultrasonic flow measurement.
SEBAFLOW-BAT-M - the proposed model with the letter M is intended for pipeline diameters from 80 mm to 400 mm.
Model SEBAFLOW-BAT-K - with the letter K designed for pipeline diameters from 400 mm to 3100 mm - 14'860,- EUR with VAT.
Special features:
- Maintenance-free flow measurement
- Early leak detection
- Installation without supply interruption
- No chamber construction necessary
- Precise measurements even at low flow rates
- Data transmission to the SebaCloud or to the customer’s own FTP server
Specifications:
SEBALOG D-U
Measuring Interval 1 min - 60 min
Communication
Short Range Radio
868 MHz (Europe)
913/916 MHz (depending on country)
Mobile Radio (GSM/GPRS/LTE)
850/900/1800/1900/2100 MHz
Alarm Via SMS and E-Mail,
additional data upload to FTP server
Operating Time Approx. 12 months (with 10 min measuring
interval, actual duration depending on use)
Temperature range -20 ºC...+60 ºC
Power Supply (external) 11...16 V DC
Power Supply (internal) 2 Lithium Battery Type Saft LSH 20 (3,6 V)
Channels
1 Flow Measuring Channel
1 Pressure Measuring Channel
2 In/Output Channels (Optional)
Interfaces
Flow Measuring Channel
RS485 (only for FLUXUS F501)
4-20 mA Current Interface
0-10 V Power Input
Interfaces
Pressure Measuring Channel
4-20 mA Current Interface
(Can be supplied by SEBALOG D-U)
0-10 V Power Input
(Can be supplied by SEBALOG D-U)
FLUXUS F501 - EnergySaver M/K
Flow Velocity 0,01… 25 m/s
Pipe Diameter M: 80 - 400 mm / K: 400-3100 mm
Repeatability 0,25 % of measured value ± 0,01 m/s
Accuracy ± 1,5 % of measured value ± 0,01 m/s
Dimensions 180 x 140 x 71 mm
Weight 1,5 kg
Protection class IP66
Power Supply 11...16 V DC
Temperature Range -10 ºC...+60 ºC
Communication Interface RS485
JUMO dTRANS p30
Input 0..10 bar Relative pressure
Output 4..20 mA zl
Connection G 1/2 Front Flush
Connection Material CrNi (Stainless steel)
Electrical Connection Type Connector DIN EN 175301-803, Form A
Measurement Range 0,00... 10 bar
Power Supply DC10..30V
Linearity 0.500
VA Stainless Steel Housing
Dimensions (without base) 500 x 500 x 220 mm
Protection class IP68
Above-floor Cabinet
Dimensions (without base) 350 x 280 x 1310 mm
Protection class IP43