Vee- ja gaasilekke lokaatorid

Pulse generator RSP 3 "Pipe pecker" for tracing plastic pipes in pair with a stethoscope or ground microphone

code: SB183050

manufacturer: SEBA KMT

2-3 days

compare

_€2950⁰⁰without VAT 2438.02 €

Add to cart

Price includes VAT 21%.
The indicated price is valid ordering till 26.09.2025.
The stock is informative

Description
Pictures
Delivery and Payment
Your question

RSP 3 pipe pecker from SebaKMT.

The detection and localization of non-metallic drinking water pipes, e.g. asbestos cement, PE and PVC, the acoustic sound pulse technique is employed. A knocking generator transmits vibrations along the pipe.
Depending on type of material, diameter and type of soil, the sound pulses propagate along the pipe and can be detected on the surface by means of a geophone. In this manner the route of the pipe can precisely be located.

Features:

Location of non-metallic pipes

Useable for different pipe diameters

Independent of electrical interference

Variable hammer-frequencies for optimal results

Choice of instruments

The HL 7000 leak detectors with one of the following microphones PAM CORR or PAM W-7 are particularly well suited for picking up the structure-borne sound. When scanning a meadow or loose soil by usage of a soil plug-in thorn it may substantially improve listening results - see attached pictures.

Coupling

The pulse generator is connected to the pipe to be traced by means of a tight chain. On plastic pipes a resilient disk may be used to prevent wear caused by this mode of excitation. The pulse rate will drop off as soon as the battery runs low, which is also an indication of the residual charge.

Specifications:

Pulse rate:

3 pulses

2 pulses for a weak battery

Range 1 40 / min

Range 2 60 / min

Range 3 80 / min

Range 4 120 / min

Intensity 25 – 50 – 100 %

Power-on green LED signal

Pulse red LED signal

Battery check flashing green signal + pulse rate change