Ehitusmaterjalide niiskusmõõturid

RWS Roof and Wall Scanner

code: TX120400
manufacturer: Tramex
possible to order
155000without VAT 1280.99 €
    Price includes VAT 21%.
    The indicated price is valid ordering till 06.09.2025.
    The stock is informative
           Roof and Wall Scanner RWS - Roof and Wall Scanner from the Irish company TRAMEX is intended for scanning medium and small area roofs to identify areas of coating damage.
           RWS is a professional, mobile, non-destructive, surface-resistance-based scanner designed for immediate measurement of roof humidity in waterproofing systems.
           RWS determines and assesses the humidity conditions of roofing systems by measuring electrical resistance in a non-destructive way. It generates a low frequency electrical signal which is transmitted to the test material by one electrode and received by the other. The strength of this signal varies in proportion to the amount of moisture in the material being tested.
          The RWS measures the current and converts it to a relative humidity value. Moving across the roof surface with the scanner provides continuous reading, and areas containing moisture are easily identified after power surges.
     
    Specification:
    Measuring depth: up to 100 mm
    Display: Analog arrow indicator
    Four sensitivity ranges:
    1. High sensitivity roof mode;
    2. Low-sensitivity roof mode;
    3. High-sensitivity EIFS / foam roof insulation mode;
    4. EIFS / foam roof insulating mode with low sensitivity
    Housing Type: ABS thermoplastic housing
    Power: 9-volt 6F22 (Krona) Alkaline (Alkaline) battery
    Dimensions: 125mm x 275mm x 75mm
    Weight: 853g
     
    Limitations: Some types of EPDM coating, butyl rubber and other conductive roofing. Decoration materials with wire reinforcement or wire mesh.
     
    Complement:
    - RWS Humidity Scanner
    - handle - extension bar;
    - transport - storage bag;
    - 9V Alkaline alkaline battery;
    - Instruction.
     
    Warranty 1 year.